← Back to 2018 Grady-White Canyon 306
Rig Tune, Burgee Staff Fabrication, Mast Steps & Dinghy Tie-Down System
UpgradeDocument on file A seller-uploaded invoice or service document backs this record, and HullGrade’s AI read the details from it.
Summary
Rigging shop checked rig tune and adjusted rod tension, repaired the burgee track and adjusted the vang. They also fabricated a carbon burgee staff and installed folding mast steps and a dinghy (RIB) tie-down system with straps, deflector and chafe guard. Work took place between June and August 2024.
Invoice Line Items
Work Performed:
-Adjust vang tension/boom angle- shorten dyneema pennant as needed.
-Check rig tune- I believe D2s are too tight-adjusted the D2s
-Burgee track- straightened and refastened at gooseneck
- staff- carbon insert (tapered carbon fish pole w/ carbon swivel) milled holes in car to lighten as well
-Inflatable tie down system- make it easier for owner to tension- better attachment (soft shackles) webbed strap
Line Items:
- Labor: 06-20/21-24: Check rig tune and adjust rod tension, repair burgee track/car- bent at gsnk, adjust vang spring pin (2) holes — 8.25 hrs @ $135.00 = $1,113.75
- Labor: 07-29-24: review pig stick issues, RIB storage issues — 6 hrs @ $135.00 = $810.00
- Material: Misc winch strapping and seat belt cover, 2 inch webbing — 1 @ $175.00 = $175.00
- Labor: 08-13 & 14-24: Fabricate burgee staff (carbon fish pole blanks), RIB tie down strop/aluminum chafe guard — 7 hrs @ $135.00 = $945.00
- Material: Carbon Fish Pole Blank per old FRP blank base DIA/taper/etc — 1 @ $420.00 = $420.00
- Material: 5 inch x 1 inch aluminum heavy wall tube — 1 @ $10.00 = $10.00
- Material: Tube 610 — 1 @ $5.00 = $5.00
- Material: 10mm Globe Pro, blue — 20 @ $2.45 = $49.00
- Labor: 08-15-24: Deliver pig sticks (old and new), Install folding mast steps 2 ft above partner, Install fwd dinghy strop (discuss aluminum chafe guard with owner) — 5 hrs @ $135.00 = $675.00
- Material: Euro Marine: Folding Mast Steps (white w/ fasteners) — 4 @ $40.00 = $160.00
- Labor: 08-16-24: Fabricate and paint deflector and build strop for stbd dinghy tie down, build tails for dinghy tie downs — 4 hrs @ $135.00 = $540.00
- Material: 4 inch x 3/4 inch x 1/2 inch G10 — 1 @ $20.00 = $20.00
- Material: Antal 20 20 deck ring — 1 @ $40.00 = $40.00
- Material: Misc fasteners — 1 @ $20.00 = $20.00
- Material: 7mm D12 78 — 10 @ $3.39 = $33.90
- Material: 12mm Dyneema chafe sleeve, black — 5 @ $4.89 = $24.45
- Material: (3) 25 ft of 10mm Globe Pro, blue — 75 @ $2.45 = $183.75
- Labor: 08-22-24: Install folding steps at masthead, finish dinghy tie down system, retrieve burgee halyard and hoist burgee staff) — 4 hrs @ $135.00 = $540.00
- Material: Ship shroud cleats - Johnson shroud cleats (shipping to CT address) — 2 @ $25.00 = $50.00
- Shipping: Shipping - Residential — 1 @ $22.00 = $22.00
- Material: Misc. dowels/glue/shop supplies — 1 @ $25.00 = $25.00
- Out-of-State non-taxable — $0.00
Equipment
Undefined